How to Solve LC-202 Error Code in Overwatch

Updated April 2025: Stop these error messages and fix common problems with this tool. Get it now at this link

1. Download and install the software.
2. It will scan your computer for problems.
3. The tool will then fix the issues that were found.

Many Overwatch fans may have encountered an LC-202 error code after trying to connect to the game on their console. This code, most commonly found on PlayStation 4 servers, is one of several ID numbers that usually indicate a connection failure on the player’s end. Fortunately, there are several ways to solve this problem.

What Causes the Overwatch LC-202 Error Code?

The most common culprit that can cause an LC-202 error is a mismatch in the network device that you are actively using. According to reports from affected users, it’s likely that limited bandwidth routers are overloaded with data, causing the game’s client to cause an error after failing to connect properly – this usually happens when multiple devices are connected to the same network, resulting in a lot of data being exchanged.

One possible reason for the Overwatch LC-202 error code is that the game server does not agree with the information your device sends it.

And in most cases, this problem occurs when several certain ports used by Overwatch are not open and cannot be used by the game. In this case, you can solve this problem by either auto-passing the ports (only if your router supports UPnP) or by manually forwarding them through the router’s settings menu.

How to Repair LC-202 Error Code from Overwatch



Check DNS settings

Use the following values for the DNS settings: Set 8.8.8.8 as Primary DNS and 8.8.4.4 as Secondary DNS.

On the computer:

1. Go to settings.
2. Select Network and Internet.
3. Click on Ethernet or Wi-Fi (depending on your connection type).
4. Select your connection
5. Go to “IP Settings
6. Click the Edit button
7. Select Edit IP Settings
8. Select the Manual option.
9. Enable IPv4 toggle switch
10. Change the preferred DNS and alternate DNS addresses.

On Xbox:

1. Go to Settings.
2. Select all settings
3. Go to network
4. Select Advanced Settings.
5. Select DNS settings, then Manual.
6. Enter the primary and secondary DNS.

On PS4:

1. Go to Settings -> go to Network
2. Set up your Internet connection
3. Select your connection (WiFi or LAN)
4. Set the IP settings to Automatic -> do not specify a DHCP hostname
5. Go to DNS settings -> select Manual -> set the above values

Connect to a wired connection

Some players have confirmed on the Blizzard forums that using a wired connection solved the problem. While this workaround only solved the problem for a small number of players, it’s worth a try. As we all know, wired connections are usually more stable than wireless connections.

Also, don’t be lazy to unplug your modem/router and reboot your computer or console. Then reconnect the power cord and reboot the computer or console.

Disconnect the Blizzard account from the console

Here is the solution that helped many users fix the LC-202 error. So disconnect your Blizzard account from your console account.

Wait a few minutes, then reconnect both accounts. Let us know if this quick workaround solved your problem.

Wait it out

While it’s not exactly a workaround, it’s the only thing you can do if nothing has worked. Many players have confirmed that this error code often disappears as suddenly as it appeared.

So instead of feeding your anger and frustration, turn off the console, take a walk in the fresh air, and try again later.

APPROVED: To fix Windows errors, click here.

Frequently Asked Questions